DiaSys Water Purifier Systems

This is an old revision of the document!

---

to disconnect the internal autofilling system implemented in the OMIN-Autofilling version, proceed as follow:

1. unplug AC power suply
2. open the osmoser
3. remove the tubing connected to the purified water output
4. remove the tubing at the left of the bottom blue valve
5. connect the purified water output directly to the left of the bottom blue valve
6. close the osmoser
7. connect a hand valve on the purified water output
8. disconnect the float sensor cable
9. switch on the osmoser